|
Just call us the GSXR Fairings Warehouse.
We've got everything you could possibly want for the first modern
racer replica sport bike, the classic GSXR 750.
Can you say GSXR 750 fairings? We have a street
upper with the headlight hole cut open or a competition upper
with the left and right center sides molded onto it to form
a one piece race fairing. There are also left and right sides
of several types to choose from:
One style has the stock appearance; the other has three louvers
that evacuate more air out of the radiator, which makes the
bike run cooler.
The belly pan/lower fairing is a one-piece
unit that is a breeze to install compared to the multi-piece
stock setup.
We have a few GSXR 750 tail sections to offer.
One tail that incorporates the left and right side pieces, the
tail light frame, solo seat cowl and license plate area in one
seamless piece. This allows you to attach the seat and tail
section in one swoop using the stock seat locks and the two
6mm fairing screws by the foot pegs. We also have the Limited
Edition one-piece race seat. But wait, there's more! We make
a solo seat cowl, a front number plate, cool air ducts to route
cool air to the carburetor area, drag bike bodywork, a fuel
tank, and even more. Really, there's no reason not to upgrade
your bike, lighten it up, replace damaged bodywork, or just
plain old customize the Bejesus out of it. Airtech can help
make your bike's wildest dreams become a reality.
|
|
 GSXR71
Suzuki GSXR 750 Street upper fairing
The turn signal holes have been filled in. This is a direct replacement
fairing. Simply drill the mounting holes and mount onto your chassis.
Replace your crash damaged bodywork with our lightweight fiberglass
piece.
Price |
|
 GSXR71P
Suzuki GSXR 750 One-piece upper
This is a one piece race upper fairing for the GSXR. It is the
upper fairing and the right and left side panels molded as a one-piece
unit. The headlight holes and turn signal holes have been filled
in for race use. Simply drill the mounting holes and mount it
onto your chassis for a cool one-piece race look.
Works with stock bellypan or our
one-piece GSXR76 bellypan (see below).
Price |
|
 GSXR72
Suzuki GSXR 750 Right Mid
This is a direct replacement panel for the right mid side of your
GSXR.
Price |
|
 GSXR73
Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid
panel.
Price |
|
GSXR74
Suzuki GSXR 750 Right vented mid
This is a right side vented racing panel for your GSXR.
Price |
 |
GSXR75
Suzuki GSXR 750 Left vented mid
This a vented racing panel for the left side of your GSXR.
Price
|
 |
 GSXR76
Suzuki GSXR 750 Lower belly
This is the lower belly pan for your GSXR. This is the right and
left side and the T section behind the tire all molded as a one-piece
unit. This lightweight fiberglass piece replaces your crash damaged
bodywork.
Price |
 |
 GSXR77
Suzuki GSXR 750 Super sport race tail
This is a cool one-piece race tail for your GSXR. This is the
right and left seat sides, the right and left tail section, and
the solo seat cowl tail light area all molded as a one-piece unit.
This piece hides the passenger provision of your long upholstery.
Simply slide your long upholstery into this tail section and then
take that assembly and take that assembly mount onto the chassis.
To remove this off of the bike simply pop the seat locks and take
the whole rear assembly off of the bike in one easy step.
Price |
 |
GSXR77L
Suzuki GSXR 750 LTD Tail
This is a direct replacement of the Limited Edition tail section
available for the GSXR750.
Price |
 |
GSXR77S
Suzuki GSXR 750 Street tail
This is a one-piece race tail for the guys who want to have a
passenger provision. This is the right and left seat sides and
the right and left tail section all molded as a one-piece unit.
This also uses your stock upholstery, and is a cool direct replacement
for your crash damaged bodywork.
Price |
 |
 GSXR77TLB
Suzuki GSXR 750 Tail light bracket
This bracket bonds to the inside any of our one piece race tails
so that you can mount the tail light into the tail section for
street use. Simply cut the taillight hole on your race tail, position
the tail light assembly into the back of the tail section, and
glue this bracket into the tail section to support your taillight.
Price |
 |
 GSXR78
Suzuki GSXR 750 Solo seat cowl
This is a direct replacement cowling for your GSXR. Attach this
to the rear part of your upholstery.
Price |
 |
 2GSXR77
Suzuki GSXR 750 Rear fender
This is a later model ('88 and up) rear fender. It will fit the
'86-'87 GSXR 750 but you will need to drill different mounting
holes.
Price
|
 |
GSXR79
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight
install. It covers up the stock headlight opening.
Price |
|
GSXR7YFC
Suzuki GSXR 750 Yoshimura frame / carb covers
Check out these cool covers with the Yosh logo on them.
Pure unobtanium, until now!
Price |
 |
 GSXRFT
Suzuki GSXR 750 Fuel tank
This is an endurance style fuel tank for you GSXR. This has a slightly
larger capacity with provisions for dual dry brake mounts on the
top. You can save seven to eight pounds off the top of your bike
with our lightweight fuel tank. It comes with one of our racing
caps on the top and a 3/8" NPT bung in the bottom of the tank
for use with a Pingel race valve. Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent. In the event of a crash, the gas tank
may rupture and spill fuel possibly catching your motorcycle on
fire. This gas tank is recommended for racing purposes, with racing
fuel only! Read more... |
|
|
 |
 YT1
Suzuki GSXR 750 Yoshimura Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 750.
Works only with the YT2 lower belly.
Takes a special windscreen
and requires bracket fabrication. It does not use the stock GSXR
headlight (we've been told CiBie
makes a light that fits).
Price |
|
 YT2
Suzuki GSXR 750 Yoshimura Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura
Tornado upper fairing.
Price
|
 |
 YT3
Suzuki GSXR 750 Yoshimura Tornado Tail section
This is a real cool designed tail section for the first generation
of GSXR chassis. This will not work with a stock GSXR
gas tank, because the front of the seat assembly is rounded
to work with the Tornado tank as the stock GSXR tank is straight
across the back.
If you were to put this on a chassis with a stock GSXR tank you
would have a half moon shaped gap in the front of the seat pan
area.
Price |
 |
YT3P
Suzuki GSXR 750 Yoshimura Tornado Tail Upholstery pan
This is the fiberglass pan that fits onto the YT3 Tornado seat
assembly. Use this pan to upholster for a finished look on your
cool Tornado tail section.
Price |
 |
YT4
Suzuki GSXR 750 Yoshimura Tornado Race Fuel Tank
The shape of this tank is definitely cool! The top of the tank
is slightly lower and the bottom a bit wider than the stock GSXR
tank. It also comes with our race aluminum gas cap and a 3/8"
NPT bung in the bottom of the tank for a Pingle
race valve.
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent. In the event of a crash, the gas tank
may rupture and spill fuel possibly catching your motorcycle on
fire. This gas tank is recommended for racing purposes, with racing
fuel only! Read more... |
|
2PGSXR1
Suzuki GSXR 750 Stretched Drag Bike Tail
What we have here folks is a drag bike tail for the first generation
GSXR' s. Basically this is the right and left seat sides and frame
covers and the solo seat cowl all molded as a one-piece unit.
This tail section has been stretched 5" longer than the stock
GSXR tail section. Since these bikes work really well on a 4-6"
stretch this 5" over tail section right about where it looks
really nice. Simple remove the stock bodywork off your bike, bolt
this baby on, and your ready to go.
Price |
|
2PGSXR2
Suzuki GSXR 750 Drag Bike Body
This is our +5 drag race tail section and a gas tank shell all
molded as a one-piece unit to fit on to a production 1986-87 GSXR750
or 1986-88 GSXR1100 chassis. This is a really cool body for that
old school small tire GSXR drag bike project.
Price |